Riken Keiki GD-3EC, Техническое руководство

Страница: 160 / 177

10. Product Specifications 10-3 Detection target gases for individual detection principles
160 / 168
10-3-5 Electrochemical type
Sensor model Gas name
Gas
symbol
F.S. 1 digit
First
Alarm
setpoint
Second
Alarm
setpoint
Calibration
gas
Operating
temperature
range
Operating
humidity
range
Years of
warranty
ESF-A24R
Hydrogen
sulfide
H
2
S 100 ppm 1 ppm 20 ppm 40 ppm H
2
S −40 °C - 70 °C *2
20 %RH -
90 %RH (no
condensation)
3 years
ESF-A24RH *3
Hydrogen
sulfide
H
2
S 30 ppm 0.2 ppm 10 ppm 20 ppm H
2
S −40 °C - 70 °C *1
40 %RH -
95 %RH (no
condensation)
3 years
*1: Allow the product to fully adjust to the usage conditions before adjusting if below −25 °C. Can be used for a total of
one week between 40 °C and 70 °C.
*2: Allow the product to fully adjust to the usage conditions before adjusting if below −25 °C. Can be used for a total of
one week between 55 °C and 70 °C.
NOTE
 Perform maintenance if a warning appears while the life assessment or self-diagnostic function is active.

Use the ESF sensor adapter when calibrating. Calibration accuracy may be reduced without the ESF
sensor adapter.
 Use a flow rate of 0.5 ± 0.1 L/min when calibrating. Calibration accuracy may be reduced if calibration is
performed using a different flow rate.

When using a diffusion type detector, gas sensitivity will be affected by ambient wind speeds.
 The number of years of warranty for the ESF sensor depends on the sensor model. Refer to the above
table.