Configuration
47
IEEE 802.11b (Wireless LAN) Configuration
Configure the printer to use IEEE 802.11b (Wireless LAN). The following table
shows the control panel settings and their default values. These items appear in
the
[
Host Interface
]
menu.
❒
To use IEEE 802.11b (Wireless LAN), select
[
IEEE 802.11b
]
for
[
LAN Type
]
in
[
Network Setup
]
in the
[
Host Interface
]
menu, and then set
[
IP Address
]
,
[
Subnet
Mask
]
,
[
Gateway Address
]
,
[
DHCP
]
,
[
Frame Type (NW)
]
and
[
Active Protocol
]
under
the
[
Network Setup
]
menu. For details about setting items under “Configuring
the Printer for the Network”, see Software Guide.
❒
The 802.11b interface unit cannot be used simultaneously with a standard
ethernet interface.
A
Press the
{
Menu
}
key.
The
[
Menu
]
screen appears on the display.
Setting Name
Default Value
Comm. Mode
802.11 Ad hoc
Channel
Inch version
(1-11) 11
Metric version
(1-13) 13
Trans. Speed
Auto Select
SSID
blank (ASSID)
WEP Setting
Not Active
Содержание P7575
