Ricoh P7575, Руководство по эксплуатации

Страница: 185 / 451

Preparing for Printing
42
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
C
Select an interface language, and then click [ OK ].
The default interface language is English.
❒
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [ PostScript 3 Printer Driver ].
Add Printer Wizard starts.
E
Click [ Next > ].
F
Click [ Local printer ], and then click [ Next > ].
G
Click [ Create a new port: ].
H
Click [ Standard TCP/IP ] in [ Create a new Port ], and then click [ Next ].
I
Click [ Standard TCP/IP ], and then click [ OK ].
J
Click [ Next ] in the [ Add Standard TCP/IP Printer Port Wizard ] dialog box.
K
Enter the printer name or IP address in the [ Printer Name or IP Address ] box,
and then click [ Next > ].
When screen for Device selection appears, select “RICOH NetworkPrinter
Driver C Model”.
L
Click [ Finish ] in the [ Add Standard TCP/IP Printer Port Wizard ] dialog box.
M
Check that the name of the printer whose driver you want to install is se-
lected, and then click [
Next > ].
N
Change the printer name if you want, and then click [ Next > ].
Select the [ Yes ] check box to configure the printer as default.
O
Click [ Next > ].
P
Specify whether or not to print a test page, and then click [ Next > ].
Q
Click [ Finish ].
The printer driver installation starts.