Ricoh P7575, Руководство по эксплуатации

Страница: 359 / 451

Monitoring and Configuring the Printer
216
channel frequency channel no. You can enable or disable the WEP function.
To enable the WEP function, specify [on]; to
disable it, specify [off].
To start the WEP function, enter the correct
WEP key.
enc [on|off] You can enable or disable the WEP function.
To enable the WEP function, specify [on]; to
disable it, specify [off].
To start the WEP function, enter the correct
WEP key.
key [ key value ] val [1|2|3|4] You can specify the WEP key when entering
in hexadecimal.
With a 64-bit WEP, you can use 10 digit
hexadecimals. With a 128-bit WEP, you can
use 26 digit hexadecimals.
Up to four WEP keys can be registered.
Specify the number to be registered with
“val”.
When a WEP is specified by key, the WEP
specified by key phrase is overwritten.
To use this function, set the same key num-
ber and WEP key for all ports that transmit
data to each other.
You can omit the numbers with “val”. The key
number is set to 1 when making these omis-
sions.
keyphrase [ phrase ] val [1|2|3|4] You can specify the WEP key when entering
in ASCII.
With a 64-bit WEP, you can use 10 digit
hexadecimals. With a 128-bit WEP, you can
use 26 digit hexadecimals.
Up to four WEP keys can be registered.
Specify the number to be registered with
“val”.
When a WEP is specified by key phrase, the
WEP specified by key is overwritten.
To use this function, set the same key num-
ber and WEP key for all ports that transmit
data to each other.
You can omit the numbers with “val”. The key
number is set to 1 when making these omis-
sions.
encval [1|2|3|4] You can specify which of the four WEP keys
is used for packet encoding. “1” is set if a
number is not specified.
Parameter Value configured