Ricoh Caplio 400G wide F, Руководство по эксплуатации

Страница: 189 / 231

Chapter 4 Section 3 Shooting with Camera Memos
189
To shoot an image with a camera memo, fol-
low the steps below.
Make sure that the camera is turned off.
Load an SD memory card with a camera
memo list into your camera.
Turn the camera on.
Set the Mode Dial to
5 5 5 5
(Shooting Mode).
Press the
O O O O
button.
The Camera Memo screen displays the first camera
memos in the categories in the camera memo list.
Press the
!"
!" !"
!"
buttons to select a memo
category and change its contents.
Press the
$ $ $ $
button to display the Memo
List screen.
Press the
!" !" !" !"
buttons to select a memo,
and then the
O
O O
O
button.
If a temporary memo has been attached, its contents
are displayed up to the end of the first row. If a voice
memo has been attached, a speaker icon is dis-
played.
To enter a temporary memo, select [Temporary Memo
Input]. (See P.191.) You can also record a voice
memo by selecting [Record]. (See P.204.)
Repeat steps to to set the camera
memo you want to use.
When you do not want to use a camera memo, click
[NO SETTING] on the camera memo list screen.
Press the
O O O O
button to confirm the cam-
era memo.
A MEMO mark appears in the lower-right corner of the
screen. This mark indicates that images will be shot
with a camera memo.
Press the shutter button to shoot an
image with a camera memo.
Shooting with Camera Memos
You can attach camera memos to the still images you shoot. Create a camera memo list with the bun-
dled software (ListEditor) and record it on an SD memory card. Even when shooting in Scene Mode, you
can shoot an image with a camera memo.