Revo R4-8-16DVR2, Руководство пользователя

Страница: 14 / 109

User’s Manual
6
WARNING: ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD. MAKE
CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE. DO
NOT INSTALL POWER CORDS UNDER RUGS OR CARPET.
THE POWER CORD HAS A GROUNDING PIN. IF YOUR POWER OUTLET DOES NOT HAVE
A GROUNDING PIN RECEPTACLE, DO NOT MODIFY THE PLUG. DO NOT OVERLOAD THE
CIRCUIT BY PLUGGING TOO MANY DEVICES IN TO ONE CIRCUIT.
FRONT PANEL CONTROLS
Copy LED
HDD LED Power LED Alarm LED LAN LED USB Port
Copy LED
The
Copy
LED is lit when the DVR making a clip copy.
HDD LED
The
HDD
LED flickers when the DVR is recording or searching video on the hard disk drive.
Power LED
The power LED is lit when the unit is On.
Alarm LED
The
Alarm
LED is lit when alarm output or internal buzzer is activated.
LAN LED
The
LAN
LED is lit when the unit is connected to a network via Ethernet.
USB Port
Connect the supplied USB mouse to one of the ports. The USB mouse will be used to access many of the DVR’s functions.
A USB flash drive can be connected to make video clip copies or for system upgrades.
NOTE: The infrared sensor on the DVR is just to the right of the LAN LED. Make certain that nothing blocks the
sensor, or the remote control will not function properly.