Revo R4-8-16DVR2, Руководство пользователя

Страница: 99 / 109

Netcon (Remote Administration System)
43
DVR NAME SERVICE (DVRNS)
Overview
Using Static IP addresses in LAN/WAN networks requires high management overhead and increases the cost burden
to users. Therefore, it has become essential for DVRs to support Dynamic IP addresses in ADSL/VDSL networks using
DHCP (Dynamic Host Configuration Protocol). This reduces cost burdens and increases cost effectiveness for system
users. Use the following steps to set up a system using DVRNS.
System Configuration
STEP 1
(
DVR

DVRNS Server)
: Register the unit name and IP address of the DVR during the DVRNS setup on
the Remote DVR. This unit name and IP address will be registered on the DVRNS server directly.
NOTE: Refer to the applicable manual for each remote DVR for more details on DVRNS setup.
STEP 2 (Netcon

DVRNS Server):
Request the IP address of the remote DVR using the registered unit name of
the DVR you want to connect to.
STEP 3 (DVRNS Server

Netcon)
: The DVRNS server notifies Netcon of the requested IP address.
STEP 4 (Netcon

DVR)
: Connect to the target DVR using the IP address returned from the DVRNS server.
NOTE: You should follow steps 2 to 4 whenever connecting to the remote site because the DVR name and IP
address might change at anytime.
MAP EDITOR
The Map Editor program allows you to create 3-D maps of remote sites. With the drag-and-drop and link function, you
can create and edit the map easily and efficiently. Run the program by selecting
MapEditor
from the Netcon options
under the Start menu in Windows.