General Safety Information
Ordinances and Regulations
REGATRON
Performance. Precision. Quality.
TC.ACS - Device Manual (V04.60) - 26.4.2022
9 / 66
1.2 Ordinances and Regulations
Follow the mounting and installation instructions during electrical installation!
In particular, in the countries of the European Union the following standard applies:
EN 62477-1 Safety requirements for power electronic converter systems and equipment
If you want to use the electrical power supply in special applications, you must comply with the related standards
and health and safety regulations.
Due to the high operating voltage and the high output voltages, an industrial electrical power supply represents a
mortal hazard.
To avoid serious injuries or significant damage, only appropriately qualified personnel who are familiar with
industrial electrical power supplies are allowed to work on the devices. These individuals must carefully read
these operating instructions prior to installation and commissioning and follow the safety instructions.
Electronic devices are in principle not fail-safe. The user is responsible for ensuring that the electrical power
supply, mains supplies and loads connected to it are placed in a safe state in the event of a failure of the device.
1.3 Categorization of the hazard Areas
The assessment of the effects of hazards from low-voltage systems with a flow of energy for supply and possibly
regeneration is divided into the following areas:
• Personnel Area (
)
• Area related to Interaction with the Device (
)
