Option: TC.ACS.CANmp Interface
Configuration of a CAN Protocol
REGATRON
Performance. Precision. Quality.
TC.ACS - Device Manual (V04.60) - 26.4.2022
66 / 66
66
SetFuncGenPhaseFlags
Set Flags of the Waveform Generator to activate specific functions
Bit 0: Ignore start angle (ignore the start angle on a block change
to this block)
Bit 1: Set trigger (set the trigger output on a block change to this
block)
Bit 2: Sync to Grid (Select phase for Synchronous Mode (enabling
Synchronous Mode see signal SetSynchronisation))
Bit 3: Phase failure (Power output is switched to high impedance
for this block)
Bit 4 - 15: Res.
Uint16:
Signal factor 1
SetFuncGenBlockDuration
Block duration time [s]
(
> 0 = duration time
, 0 = duration time is infinite)
Sint16, Sint32:
All signal factors
Float32:
Signal factor 1
Signal name
Description
Configurable
data types /
signal factors
