Reeves G2 series, Руководство по эксплуатации

Страница: 18 / 183

Operation & Maintenance w/IPB G2 Series Decontamination Water Heater 0003
Part Number: 1006375 0003-2 DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
WATER HEATERS CONTINUED
G2-I:
The Reeves G2-I multi-fuel 425,000 BTU, self-heating water and mobile Decon Solution Injection System is portable,
easy to maneuver and built for field use. The unit is the ideal way to supply multiple decontamination showers or
multiple field showers and sinks with heated water, thus increasing the safety and comfort of both patients and
personnel.
FEATURES
•
425,000 BTU, self-heating water system
•
Multi-Fuel (diesel, kerosene, home heating oil, and JP4)
•
Flow rate of up to 28 gallons per minute
•
10-gallon on-board fuel tank with drain plug
•
110V outlet onboard for convenience
•
Instructional panel for ease of operation
•
Built-in Anti-Scald Protection device factory pre-set at 110ºF
•
Thermostatically-controlled
•
Operator's panel with color-coded temperature and pressure gauges
•
Heater ignited by solid state electrical system (NO FLAME) that ignites upon water flow
•
Burner motor is a 1/4 hp, 120 V, 60hz, 1 ph and runs at 3450 rpm
•
Inline GFCI protection
•
Fuel filter with water separator
•
Modular design -- ruggedized for field use
•
Man portable and easy to maneuver
•
Mounted on four (4) no flat tires with hand brake for safety
•
1 ½” Female NST inlet with swivel and tethered compressed air adapter for winterization purposes
•
Unit will safely accept incoming water pressure of up to 125 psi
•
System can be adapted for use with multiple water sources that provide adequate water pressure and flow
(adapters not included)
•
Four (4) discharge outlets with male cam lock fittings and tethered caps (2 - decontamination solution / 2 -
fresh rinse
•
Includes two (2) 35-foot, ½” supply hoses with cam lock fittings that provide heated water and solution to
Reeves shower plumbing
•
Discharge outlets and supply hoses can be factory modified in order to supply heated water to non-Reeves
shower systems
FEATURES OF INJECTION SYSTEM:
•
Unit includes a non-electric, volumetric proportional injection system
•
Injection rate adjustable onboard -- even while water is flowing
•
Injection system designed to operate upon water flow
•
Chemically resistant to Sodium Hypo-Chloride
•
Built-in mixing chamber
•
Easy to use black manual bypass (ON/OFF) lever
•
In-line 100 micron filtration system
•
Automatic air relief valve
•
Flow range: 4.2 to 600 gallons per hour
•
Injection rate: 1% (1:100) to 10% (1:10)
•
Injector operating pressure: 10-85 psi
•
Heavy-duty siphon hose
•
Hose draws out of 6.6-gallon decontamination solution tank placed in storage area below