Raymarine A65, Инструкция по установке и эксплуатации

Страница: 44 / 308

Network cable connector types
There are 2 types of network cable connector — SeaTalk hs and
RayNet.
SeaTalk hs connector — used for connecting
SeaTalk hs devices to a Raymarine network switch
via SeaTalk hs cables.
RayNet connector — used for connecting
Raymarine network switches and SeaTalk hs
devices to the multifunction display via RayNet
cables. Also required for connecting a crossover
coupler if only one device is being connected to
the display's Network connector.
Network cable types
There are 2 types of SeaTalk hs network cable — “patch” and
“network”.
• Patch — for connecting the following devices to a Raymarine
network switch:
– Thermal camera via PoE injector.
– Additional Raymarine network switch.
– PC or laptop using Voyager planning software.
• Network — for connecting the following devices to a Raymarine
network switch:
– Sonar Module.
– SR100 Sirius weather receiver.
– Additional compatible Raymarine multifunction displays.
RayNet connector network cables
Cable Part number
1 m (3.28 ft) RayNet to SeaTalk hs
(RJ45) cable
A62360
3 m (9.84 ft) RayNet to SeaTalk hs
(RJ45) cable
A80151
10 m (32.8 ft) RayNet to SeaTalk hs
(RJ45) cable
A80159
400 mm (1.3 ft) RayNet to RayNet
cable A80160
2 m (6.56 ft) RayNet to RayNet cable A62361
5 m (16.4 ft) RayNet to RayNet cable A80005
10 m (32.8 ft) RayNet to RayNet cable A62362
20 m (65.6 ft) RayNet to RayNet cable A80006
50 mm (1.97 in) RayNet (male) to
RayNet (male) cable A80162
400 mm (1.3 ft) RayNet to SeaTalk hs
(female) adaptor
A80160
RayNet cable puller 5 pack R70014
SeaTalk hs network cables
Cable Part number
1.5 m (4.9 ft) SeaTalk hs network cable E55049
5 m (16.4 ft) SeaTalk hs network cable
E55050
10 m (32.8 ft) SeaTalk hs network cable E55051
20 m (65.6 ft) SeaTalk hs network cable E55052
SeaTalk hs patch cables
Cable Part number
1.5 m (4.9 ft) SeaTalk hs patch cable E06054
5 m (16.4 ft) SeaTalk hs patch cable E06055
Cable Part number
10 m (32.8 ft) SeaTalk hs patch cable E06056
15 m (49.2 ft) SeaTalk hs patch cable A62136
20 m (65.6 ft) SeaTalk hs patch cable E06057
Radar connection
The multifunction display is compatible with Raymarine Non-HD
digital radomes and HD / SuperHD radar scanners. The scanner is
connected using a SeaTalk
hs cable.
Note:
• New c Series and New e Series displays (excluding the e7
and e7D) can connect 2 SeaTalk hs / RayNet devices directly
to the display.
• New a Series and the e7 / e7D displays can connect 1
SeaTalk hs / RayNet device directly to the display.
The radar is usually connected via a Raymarine network switch. On
smaller systems (with only one display and no other digital devices)
the radar may be connected to the display directly using a SeaTalk
hs
crossover coupler.
Radar connected using Raymarine network switch
D 12252-1
3
2 1
4
6 7
5
1. Radar scanner.
2. Raymarine network switch.
3. RayNet cable.
4. RayNet to SeaTalk hs network cable.
5. SeaTalk hs crossover coupler
6. VCM (Voltage Converter Module) — required for Open Arrays .
7. Power connection.
44
New a Series / New c Series / New e Series