Raymarine A65, Инструкция по установке и эксплуатации

Страница: 105 / 308

Menu item Description Options
• Deep Fish Limit — Specifies the upper value for the Fish Alarm Depth
Limit.
Shallow Fish Limit
• 2 ft (or equivalent units) to the maximum of the
transducer range
Deep Fish Limit
• 2 ft (or equivalent units) to the maximum of the
transducer range
Fuel Manager In the fuel manager alarm options you can switch the low fuel warning
alarm on or off and specify the fuel level at which the alarm is triggered. Low Fuel
• On
• Off (default)
Fuel Level
• 0 to 99999
Guard Zone The Guard Zone feature in the radar application triggers an alarm when
a target is within a specified zone. You can adjust the sensitivity of the
alarm. Ensure that the sensitivity is not set too low, or targets may be
missed and the alarm will not be triggered. Guard Zone Sensitivity
• 1% to 100%
Off Track When set to On, during active navigation an alarm is triggered when your
vessel steers off-track more than the value you specify for the Off Track
XTE setting. Off Track Alarm
• Off (default)
• On
Off Track XTE
• 0.01 to 9.99 nm (or equivalent units)
Sea Temperature
When set to On, triggers an alarm when the sea temperature is equal to or
lower than the limit you specify for the Lower Temp Limit or equal to or
greater than the limit you specify for the Upper Temp Limit setting.
Sea Temperature
• Off (default)
• On
Lower Temp Limit
• 60 degrees fahrenheit (or equivalent units)
• –09.9 to +99.7 degrees fahrenheit (or equivalent
units)
Upper Temp Limit
• 75 degrees fahrenheit (or equivalent units)
• –09.7 to 99.9 degrees fahrenheit (or equivalent
units)
Waypoint Arrival
When you arrive at a waypoint, an alarm is triggered. This setting allows
you to specify the distance from the target waypoint at which the alarm
is triggered. The units used for this setting are based on the units you
specify for distance in the Units Set-up menu.
0.01 to 9.99 nm (or equivalent units)
Accessing the alarms menu
From the homescreen:
1. Select Set-up .
2. Select Alarms .
The Alarms menu is displayed.
3. Select the appropriate alarm category.
Using alarms and MOB functions
105