Raritan Command Center CC-SG, Руководство администратора

Страница: 47 / 270

C
HAPTER
3: E
XAMPLE
C
ONFIGURATION
W
ORKFLOW
31
6. If needed, enter the Boolean logic to apply additional rules in the
Validate
panel. Example:
use (Rule0 & Rule1) for AND or use (Rule0 | Rule1) for OR. Additional combinations can be
used.
7. Click
Validate
then
Update
.
8. Click
Close
to close Port Groups Manager screen.
9. Repeat steps 1 through 8 to add other port groups.
Create/Edit Policies
Polices specify the devices and ports a user can access as well as when they can be accessed.
Polices were automatically created per element when the Association Wizard was run, see section
Create Associations
earlier in this chapter for additional information. These policies, for
example, Allow Linux Ports, include the port group that was automatically generated and grant
full access to the ports. Once created, you will then apply the policy to a user group.
1.
On the
Associations
menu, click
Policy Manager
. The
Policy Manager
screen appears.
Figure 31 Policy Manager Screen
2. Click
Add
to add a new policy. The
Add Appliance Policy
window appears.
3. Type the name of the new policy in the
Enter Policy Name
field.
4. Click
OK
to add the new policy. If you clicked
OK
, the new policy name appears in the
Name
field.
5. Click on the
Device Group
drop-down arrow and select a device group.
6. Click on the
Port Group
drop-down arrow and select a port group.
7. Click on the up or down arrows in the
Start Time
and
End Time
fields to assign a starting
time and an ending time during a 24-hour period for this policy to be in effect.
8. Select the appropriate option buttons for this policy to be in effect:
Any
to apply policy every
day,
Weekday
to apply policy every working day,
Weekend
to apply policy Saturdays and