Raritan Command Center CC-SG, Руководство администратора

Страница: 175 / 270

C
HAPTER
11: S
YSTEM
M
AINTENANCE
159
End CC-SG Session
Log Out
To exit CC-SG at the end of a session, or to refresh the database in case you or another user has
made changes while you were logged in, log off from CC-SG entirely, then log in again.
1.
On the
Session
menu, click
Logout
. The
Logout
window appears.
Figure 189 Logout Window
2. Click
Yes
to log out of CC-SG or
No
to close the window. Once you log out, the CC-SG
login window appears.
3. Log on to CC-SG again, or click
Exit
to shut down CC-SG completely.
Exit CC-SG
If at any time you want to exit CC-SG, you can exit.
1.
On the
Session
menu, click
Exit
. The
Exit
window appears.
Figure 190 Exit Window
2. Click
Yes
to exit CC-SG or
No
to close the
Exit
window and continue working.
Maintenance Mode
This mode restricts access to CC-SG so that an administrator can perform various operations
without disruption. Operations can be performed from the GUI or from an SSH command line
interface via clients, such as Putty, OpenSSH Client, etc. Please see
Chapter 12: Advanced
Administration, SSH Access
for additional information.
Current users, except the administrator who is initiating Maintenance Mode, are alerted and
logged out after the configurable time period expires. While in Maintenance Mode, other
administrators are allowed to log into CC-SG, but non-administrators are prevented from logging
in. An SNMP trap is generated each time CC-SG enters or exits Maintenance Mode.
Note: Maintenance Mode is only available on standalone CC-SG’s and not in a cluster
configuration.