RADWAG APP 3Y, Руководство пользователя

Страница: 119 / 191

- 119 -
26.1. Working mode activating procedure
Procedure:
•
while in the main window, press soft key located in the upper bar of the
display, which opens a submenu <Working modes> with selection of
available working modes,
•
select < SQC> , mode, the software automatically returns to the main
window and displays pictogram in the upper bar,
•
Simultaneously, the message bar displays a command <Start control > and
a soft-key on control start is visible in the bottom tool bar:
Start control
Control start procedure:
•
Starting a control process requires logging a user with corresponding access
level.
Caution:
1.
Starting a control requires that an access level of the logged user is at
least a <user>. If a logged user or an anonymous user have access level
set to <guest> then on control start the software opens a message box
informing on: <Unauthorized access>.
2.
Logging procedure is described in point 9 of this user manual, and
procedure determining access level for each user is provided in point 13 of
this user manual.
•
Set general settings of working mode parameters to balance memory
< SQC> , description in point 26.2,
Select a needed product (by pressing a corresponding soft key
<
> in the bottom bar or using balance’s keyboard with correctly determined
data on a control: