RADWAG APP 3Y, Руководство пользователя

Страница: 139 / 191

- 139 -
Procedure
•
Enter submenu < Databases>, and press < Reports from density>
key
•
Press field of a desired report record, unless it is visible on the top of the
list, wind the list forward using navigating keys
•
Report’s name consists of date and time of its creation, e.g.:
2011.12.12 11:12:15
Caution:
It is possible to use an option for searching a report from density.
List of parameters in a report from density :
1. Sample number, field with a value if in Density mode option: Request
sample number is set = YES
2. Start date
3. End date
4. Density [calculated density of a sample of solid, liquid or
air]
5. Volume [calculated volume of tested sample, density
measurement of solid object ]
6. Procedure [depending on selected procedure, data contained
in a report may change]
7. User [name of a user carrying out the procedure]
8. Product [name of tested sample]
9. Standard liquid [name of liquid used for determining density
measurement of solid object ]
10. Standard liquid density [ density determination of solid object ]
11. Temperature [temperature of liquid used for carrying out a
measurement, density determination of solid
object ]
12. Plunger volume [ density determination of liquid ]
13. Mass of steel standard [ density determination of air ]
14. Mass of aluminum standard [ density determination of air ]
15. Density of steel standard [ density determination of air ]
16. Density of aluminum standard [ density determination of air ]
17. Weighing 1 [mass measurement of tested sample or a
plunger in the air, or mass of measured steel
standard]
18. Weighing 2 [mass measurement of tested sample or a
plunger in liquid, or mass of measured aluminum
standard]
27.10. Controls
(not available in standard balance version)
Each product control carried out on a balance is sent to a connected printer and
saved in the
< Controls> database. Each control saved in the database
features its specific number set at the moment of its completion.