Quantum DXi8500, Руководство пользователя

Страница: 328 / 520

Chapter 9: DXi8500 Configuration
VTL
298 Quantum DXi8500 User’s Guide
Note: If necessary, use the controls at the bottom of the table to
navigate between multiple pages of results. Select the
number of rows to display in the Show drop-down box.
7 In the Destination Location drop-down box, select the type of
location you want to move the cartridge to (
Drive
,
Storage Slot
,
I/E
Slot ).
8 Select the destination location to move the cartridge to.
Note: The destination section displays empty drives, storage slots,
and I/E slots. Offline drives are
not
displayed. A drive might
be offline if it has not been mapped to a host (see Host
Access on page 300).
9 Click Apply .
10 Return the partition to an online state (see Changing Partition Mode
on page 290).
Media Unload
Use the Media Unload page to perform a bulk unload of virtual tape
cartridges from drives or I/E slots.
Note:
If you do not create and associate a host access group with a
partition, the virtual devices are not visible from the host, and
drives cannot be destinations for move operations (see Host
Access on page 300).
Caution: If you unload a virtual tape cartridge from a drive while a
backup to that drive is in progress, the backup job will fail.
To access the Media Unload page, on the Media page, click the Unload
tab (see Figure 168 ).