Quantum DXi8500 Скачать руководство пользователя страница 459

Страница: 459 / 520

Chapter 10: DXi8500 Utilities

Diagnostics

Quantum DXi8500 User’s Guide

429

The

General

page displays the following information about the most

recently run healthchecks:

•

Status

- The status of the healthchecks (

In Progress

Success

Failed

, or

Interrupted

•

Progress

- The percentage complete of the healthchecks.

•

Start Time

- The time the healthchecks started.

•

End Time

- The time the healthchecks ended.

Use the

General

page to perform the following tasks:

• To start all enabled healthchecks, click

Start

• To stop all healthchecks in progress, click

Stop

Status

The

Status

page allows you to view information about the most recent

test results for each healthcheck. You can also enable or disable a

healthcheck.
The following healthchecks are available:

•

De-Duplication

- Checks the overall health of the blockpool. This

healthcheck verifies that the metadata in the namespace file and the

data tags in the blockpool are correctly in sync.

•

Integrity

- Checks the integrity of data in the blockpool. This

healthcheck examines a sample of data tags in the blockpool and

verifies that the data has been properly stored without errors or

corruption.

To access the

Status

page, on the

Healthchecks

page, click the

Status

tab (see

Figure 240

Содержание DXi8500









































































































































































































































































































































































































































































































































Результаты поиска

Содержание DXi8500

Отзывы:

Quantum DXi8500, Руководство пользователя, Страница: 459 / 520

Результаты поиска

Содержание DXi8500

Отзывы: