Quantum DXi8500, Руководство пользователя

Страница: 236 / 520

Chapter 6: DXi8500 Replication
Receive VTL
206 Quantum DXi8500 User’s Guide
The Snapshots List displays the following information about each
snapshot:
•
Partition Name
- The name of the partition.
• Source DXi - The hostname of the system that the snapshot was
sent from.
• Started - The time the most recent replication job was started.
• Finished - The time the most recent replication job finished.
• Status - The status of the most recent replication job (see
Replication and Synchronization Status on page 185). Click the
status to display detailed information about the most recent
replication job.
Note: Click a column heading to sort the rows in the table by that
column. Click the column heading again to reverse the sort
order.
Recovering a Partition
Recover a VTL partition if the source system is unavailable and you need
to access the partition (for example, to continue performing backups).
When you recover a partition, you select a received snapshot. The
DXi8500 uses the snapshot to recreate the partition on the target
system just as it was at the point in time when the snapshot was saved.
Note:
To recover a partition, the target system must support the
library emulation and drive type used in the original partition.
For a list of the available library emulations and drive types on
the target system, see Adding a VTL Partition on page 284.
To recover a partition:
1 On the target system, select a snapshot in the Snapshots List and
click
Recover
.
The Recovered Partition Name page displays (see Figure 115 ).