Quantum DXi8500 Скачать руководство пользователя страница 215

Страница: 215 / 520

Chapter 6: DXi8500 Replication

Send VTL

Quantum DXi8500 User’s Guide

185

Replication and Synchronization Status

A replication job can have one of the following statuses:

•

In Progress

- The replication job is in progress.

•

Partial

- The replication job was partially completed. Generate a

replication report to see the cartridges that were not replicated (see

Reports

on page 220).

•

Queued

- The replication job is queued and will continue when the

system is ready.

•

Waiting

- The replication job is waiting for another job to complete

before beginning.

•

Success

- The replication job was completed successfully.

•

Failed

- The replication job was not completed.

A synchronization job can have one of the following statuses:

•

Queued

- The synchronization job is queued and will continue when

the system is ready.

•

Success

- The synchronization job was completed successfully.

•

Recovering

- The recover operation is in process.

•

Replicating

- The replication operation is in process.

•

Failed

- The synchronization job was not completed.

Enabling Replication

For a Partition

Enable replication for a VTL partition to allow the partition's data to be

replicated to another DXi system (the target). Disable replication if you

do not want to replicate the partition's data to another DXi system.

Note:

To be eligible for replication, a partition must have data

deduplication enabled at the time it is created.

Caution:

Do not replicate a partition containing media in an

Exported

state.

To enable or disable replication for a partition:

Select the partition and click

Edit

Содержание DXi8500









































































































































































































































































































































































































































































































































Результаты поиска

Содержание DXi8500

Отзывы:

Бренды по названию

Популярные бренды

Quantum DXi8500, Руководство пользователя

Результаты поиска

Содержание DXi8500

Отзывы:

Бренды по названию

Популярные бренды