Quantum DXi8500 Скачать руководство пользователя страница 394

Страница: 394 / 520

Chapter 9: DXi8500 Configuration
Scheduler

364

Quantum DXi8500 User’s Guide

•

Delete this occurrence

- Remove the selected occurrence in an

event series from the schedule.

•

Delete all occurrences

- Remove the entire event series from

the schedule.

The event or series is deleted from the schedule and will no longer

occur.

Scheduler NAS

The

Scheduler NAS

page allows you to view a list of upcoming events

for scheduled NAS replication activity on the DXi8500.
To access the

Scheduler NAS

page, on the

Scheduler

page, click the

NAS

tab (see

Figure 202

Figure 202 Scheduler NAS
Page

The

Scheduler NAS

page displays the following information about NAS

replication events that are scheduled to occur:

•

Share

- The name of the NAS share.

•

Start Date and Time

- The date and time the scheduled replication

will start.

•

Description

- The description of the event (if available).

To adjust the number of events displayed, do the following:

Содержание DXi8500









































































































































































































































































































































































































































































































































Результаты поиска

Содержание DXi8500

Отзывы:

Quantum DXi8500, Руководство пользователя, Страница: 394 / 520

Результаты поиска

Содержание DXi8500

Отзывы: