Quantum DXi8500, Руководство пользователя

Страница: 383 / 520

Chapter 9: DXi8500 Configuration
Scheduler
Quantum DXi8500 User’s Guide 353
• Port Type - The current mode of the Fibre Channel port ( Initiator or
Target ).
The
Backpanel Locations
section displays a graphical representation of
the Fibre Channel ports as they appear on the rear of the system. The
diagram shows the status of each Fibre Channel port: Mapped Target
(green),
Unmapped Target
(yellow),
Active Initiator
(blue), or
Inactive
Initiator (orange).
Editing the Fibre Channel Port Type
Edit the port type to change the mode of a Fibre Channel port to
initiator or target mode. You can change the port mode only on inactive
connections:
• Before changing a Fibre Channel port type from initiator to target,
unplug the Fibre Channel port wire connection.
• Before changing a Fibre Channel port type from target to initiator,
un-map any host mapping on the Fibre Channel port, and unplug
the Fibre Channel port wire connection.
To edit the Fibre Channel Port type:
1 Select the port in the list and click Edit .
2 Select the new port mode ( Initiator or Target ) in the drop-down
box (see Figure 198 ).
3 Click Update .
Scheduler
The Scheduler page allows you to manage scheduled events on the
DXi8500, including replication and replication throttling, e-mail reports,
healthchecks, and space reclamation. With schedules, you specify when
certain events should occur, and the system automatically performs
those events at the specified time. Events can be one-time only, or they
can reoccur at defined intervals.
To access the
Scheduler page, click the Configuration menu, and then
click the Scheduler tab.