Quantum DXi8500 Скачать руководство пользователя страница 467

Страница: 467 / 520

Chapter 10: DXi8500 Utilities

Space Reclamation

Quantum DXi8500 User’s Guide

437

• To stop space reclamation, click

Stop

• To update the display while space reclamation is running, click

Refresh

Space Reclamation Status

Space reclamation can have one of the following statuses:

•

Reclamation Completed

- Space reclamation completed without

errors.

•

Reclamation Started by User

- Space reclamation was started

manually by a user.

•

Reclamation Interrupted

- Space reclamation was interrupted and

must be restarted.

•

Reclamation Interrupted by User

- Space reclamation was

interrupted by a user and must be restarted.

•

Reclamation Interrupted - Error Encountered

- Space reclamation

was interrupted because an error was encountered and must be

restarted.

•

Reclamation Interrupt by User - Cannot be interrupted at this

time

- Because the system is in a Low Space state, space reclamation

cannot be stopped. Wait for space reclamation to finish freeing up

disk space.

•

Reclamation Completed - No Candidates To Delete

- Space

reclamation completed, but there were no candidates for

reclamation.

•

Reclaim Existing Blockpool Freed Space

- The existing blockpool

space has been reclaimed for use.

•

Stage 1 of 4

- Reclaim Disk Space (Initial).

•

Stage 2 of 4

- Calculating Deletion Candidates.

•

Stage 3 of 4

- Deleting New Candidates.

•

Stage 4 of 4

- Reclaim Disk Space.

Содержание DXi8500









































































































































































































































































































































































































































































































































Результаты поиска

Содержание DXi8500

Отзывы:

Бренды по названию

Популярные бренды

Quantum DXi8500, Руководство пользователя

Результаты поиска

Содержание DXi8500

Отзывы:

Бренды по названию

Популярные бренды