Quantum ActiveScale X100, Руководство по установке

Страница: 228 / 265

ActiveScale™ OS X100 Rackless Installation Guide
228
15.4.1 Power cords
Use only tested and approved power cords that are connected to either:
• Properly grounded power outlets.
• The insulated sockets of the rack internal power supply.
If an AC power cord was not provided with your product, purchase one that is approved for use in your
country.
To avoid electrical shock or fire, check the power cords that will be used with the product as follows:
• The power cord must have an electrical rating that is greater than that of the electrical current rating
marked on the product.
• Do not attempt to modify or use the AC power cord(s) if they are not the exact type required to fit into
the grounded electrical outlets.
• The power supply cord(s) must be plugged into socket-outlet(s) that is /are provided with a suitable
earth ground.
• The power supply cord(s) is / are the main disconnect device to AC power. The socket outlet(s) must
be near the equipment and readily accessible for disconnection.
15.5 Rack specifications
The following table lists the rack specifications for the racked
ActiveScale X100. Rackless versions of the
ActiveScale X100 use customer-supplied racks.
Quantity (per system) 4 4
Plug standard NEMA L6-30P IEC 60309 32A 2P+E
Outlet standard NEMA L6-30R IEC 60309 32A 2P+E
Weight 18 lbs (8.1 kg) 18 lbs (8.1 kg)
Dimensions •
Width
—2.2 in (56 mm)
•
Depth
—2.3 in (56 mm)
•
Height
—69 in (1753 mm)
•
Width
—2.2 in (56 mm)
•
Depth
—2.25 in (58 mm)
•
Height
—69 in (1753 mm)
Rack position Rear of the rack 0U Rear of the rack 0U
Operating temperature 32°F to 140°F
(0°C to 60°C)
32°F to 140°F
(0°C to 60°C)
Condition Single-phase NEMA L6-30P Single-phase IEC 60309 24A 2P+E