Quantum ActiveScale X100 Скачать руководство пользователя страница 125

Страница: 125 / 265

ActiveScale™ OS X100 Rackless Installation Guide

125

k. Enter your system’s geolocation information.

Tip: Street Address

City

State

, and

Country

are optional. Default

Country

USA.

Tip:

Timezone is optional; it defaults to America/Los_Angeles (UTC-8).

l. Choose a durability policy for the system.

The table below describes the durability policies and how they behave with the default value for

the small file threshold.

Warning:

Once the post-login configuration wizard completes, you can no

longer change the durability policy.

Tip: Enable Small File Policy

is optional; it defaults to

Small File

Threshold (bytes)

defaults to the preset value for the storage policy you select.

Table 10

1. Storage policies for a single site ActiveScale P100

Policy name

Description

Details

Balanced

single site

This policy provides balance

between usable capacity,

durability, and throughput. Usable

capacity will be 6

% of raw

when storing large objects.

• Large files: 13/4.
• Small files: 6/4 with a threshold 0 to 8,388,608 bytes.

Default: 524,288 bytes.

• Average client large file size to avoid stranded storage:

804-1127 KB depending on disk capacity.

• Storage overhead: Large files: 1.44x, Small files: 3.5x.
• Durability: Up to 13 nines.
• Read availability: Objects are retrievable even if one

Storage Node is unavailable and one additional drive fails.

Capacity

optimized

single site

This policy provides the highest

usable capacity. Usable capacity

will be 73% raw when storing

large objects.

• Large files: 15/4.
• Small files: 6/4 with a threshold of 0 to 8,388,608 bytes.

Default: 524,288 bytes.

• Average client large file size to avoid stranded storage:

804-1194 KB depending on disk capacity.

• Storage overhead: Large files: 1.36x, Small files: 3.5x.
• Durability: Up to 12 nines.
• Read availability: Objects are retrievable even if one

Storage Node is unavailable and one additional drive fails.

Default

, single

site

Balanced with a small file threshold of 524,288 bytes.

Содержание ActiveScale X100










































































































































































































































































Результаты поиска

Содержание ActiveScale X100

Отзывы:

Бренды по названию

Популярные бренды

Quantum ActiveScale X100, Руководство по установке

Результаты поиска

Содержание ActiveScale X100

Отзывы:

Бренды по названию

Популярные бренды