quadient AS-Orbit, Руководство пользователя

Страница: 69 / 224

User Manual Version 3.1 69
DISTANCES
The
DISTANCES
menu is used to provide the printer with the physical distances between the
different components in the system.
Pos: 81.24 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1206_DIST.FD-TOF_AS-2060/Orbit/OrbitBase @ 0\mod_1254749918717_912.doc @ 4245 @
DIST. FD-TOF
Here the distance between the feeder and Top of Form sensor (paper sensor) can be
adjusted (mm/inch). Setting the proper value will allow the printer to control the start/stop
function of an interfaced feeder more precisely. For example this feature will help eliminate
the feeding of blank media at the end of a print job.
The maximum value is
1200 mm / 47.9”
.
Default:
410 mm / 16.1”
Pos: 81.25 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1207_DIST.TOF-U1 @ 0\mod_1254749915826_912.doc @ 4241 @
DIST. TOF-U1
Here the distance between the Top of Form (
TOF
) sensor (paper sensor) and the first
cartridge of the first print (
U1
) unit has to be set (mm/inch). The value is important to
obtain the exact horizontal starting position of the printed images. Wrong values will result
in print positions which do not match the horizontal positions you have set via your software
application.
Use an appropriate ruler or a measuring tape to determine the distance (LS DIST), as
shown in Figure 30. Then use the test to verify the correct setting, as shown in Figure 31.
The TOF sensor is also known as the Light Sensor (LS). The measuring
points used to obtain the "
DIST. TOF-U1
" value are referenced as "LS
DIST" in Figure 30 below.
The maximum value is
200.9 mm / 7,99”
.
Default:
90.1 mm / 3.55”