quadient AS-Orbit, Руководство пользователя

Страница: 208 / 224

208 User Manual Version 3.1
12.4 How to adjust the
Quadient
FD-13/FD-15 Feeder to the medium
This instruction is just a short excerpt of the
Quadient
Feeder user manual. For
detailed instructions please refer to this specific document.
The
Quadient
Feeder is an optional accessory device that can be used in combination
with the
Quadient
AS-Orbit printer. Please see chapter 9.4
Accessory devices, on page 186 for further information.
Adjusting the
separation
rollers to the
media
thickness
• Loosen the wing grips (F1) of the paper side guides and push
these all the way outwards (see Figure 96).
• Check that both outer adjustment knobs (F2) of the separator
system are centered ( ••• -Position ). Unlock the separator system
by turning the separation lock knob (F3) clockwise (see Figure 97).
• Lift up the separator rollers by use of the loose separation lock
knob (F3). Put one sheet of the paper under the separation rollers
and drop them again (see Figure 98).
• Lock the separator system by turning the center separation lock
knob (F3) counter-clockwise and remove the medium.
Depending on the fed paper and its thickness: widen the
separation gap by turning both outer adjustment knobs (F2)
clockwise (see Figure 99).
Figure 96: Separator system
Figure 97: Feeder
adjustment I
Figure 98: Feeder
adjustment II
Figure 99: Feeder
adjustment III
F1
F2
F4
F3