quadient AS-Orbit, Руководство пользователя

Страница: 38 / 224

38 User Manual Version 3.1
2: Ink costs and ink range This line shows one of the following information:
InkCosts/Job:
Calculates and shows the cost of ink
for the current print job in the set currency.
Costs/1000Pg
: Calculates and shows the cost of ink
per 1,000 pages of the current print job.
Pages/Cartr.
: Calculates and shows the number of
pages you can print, of the current print job, with the
remaining amount of ink in the cartridge.
Please consider that the information above are
calculated average values only. Therefore the
accuracy of the values will increase as more pages are
printed.
To show information in this line, you first have to set
a cost per cartridge greater than zero. To do this,
select this line and hit the Ok key. Or you can open
the main menu of the printer and select the following
menu:
PRINTER CONFIG.
>
INK
>
INK COST CONFIG.
3: Transport speed This line shows the current speed of the transport
system. Please note that the speed should not exceed
the maximum value for the set print quality (see line
6). E.g. with a print quality of 6 x 6 dpi, the maximum
speed is 0.540 meter/second / 106.2 ft/min.
4: Throughput This lines shows one of the following information:
Pages/h:
Shows the current throughput of the
machine, calculated from the last few pages.
JOB Pages/h:
Shows the average through since the
beginning of this print job. This is valuable information
to measure the actual productivity of the machine.
5: Ink type This line shows the currently set ink type.
6: Print quality This lines shows the currently set print quality. To
change the quality select this line and use the arrow
right or arrow left
key to change the quality.
Please note that the selected print quality determines
the maximum speed of the machine.
This setting can be locked, so that a print quality
setting, send from the PC is ignored. To lock this
setting, select this line and press the Ok key for
four seconds. A
±
symbol appears next to the quality
setting, showing that it is locked now.
To unlock the setting select this line again and press
the Ok key for four seconds. The
±
symbol
disappears again.