10
IS125 Conveyors | Installation & Maintenance Instructions
Mount Installation
Universal Adjustable Mounts / Tee Mounts
u
Frame Mounting
1
Place mount in desired
location where there are
accessory holes.
2
Use two thread forming torx
head screws and two wash-
ers to attach mount to frame.
u
Tee Slot Mounting
>
The following procedures can also be used for attaching stand brackets and adjustable guide brackets.
1
Insert square nuts into tee
slot.
2
Thread 1” set screws
into square nuts. (Do not
tighten)
3
Position mount over set
screws.
4
Slide mount to desired
position on conveyor.
5
Tighten set screws.
6
Place flat washers onto set
screws and thread hex nuts
onto them.
