20
IS125 Conveyors | Installation & Maintenance Instructions
Heavy Duty Motors
u
Install Vent Plug Into Speed Reducer
1
Remove pipe plug from top-
most port in speed reducer.
2
Verify that there is oil in
reducer.
3
Gently thread brass half
into plastic half of vent
plug.
4
Install vent plug in open
port. 1/4 turn past hand
tight.
For more information, refer to manual provided with speed reducer.
u
Install Heavy Duty Motor to Speed Reducer
1
Remove key ring.
2
Lightly tap area adjacent
to key with a flat head
screwdriver.
3
Rotate input quill on speed
reducer until keyway is in
12 o’clock position.
4
Rotate shaft on motor
until key is in 12 o’clock
position.
5
Apply a generous amount
of anti-seize to input quill
and shaft.
6
Install motor into speed
reducer by guiding keyed
shaft into place.
7
Rotate motor until work box
is in desired position.
8
Insert and tighten hex head
screws to secure motor.
