6
IS125 Conveyors | Installation & Maintenance Instructions
u
Installing Cross Ties
For applications using a single cross tie, the cross tie should be installed between the cross bars of the stands. For applications using two cross ties, the cross ties should
be installed between the uprights of the stands. The installation process is the same for each.
4
x
2
x
1
Using a 5mm allen wrench,
loosen two socket head
cap screws in each cross tie
adjustment plate.
2
Slide adjustable cross tie
pieces to fit between stands.
3
Loosen triangular Quick
Clamp on each end of cross
tie.
4
Ensuring the socket head
cap screw is facing you,
slide Quick Clamp into tee slot at
desired mounting position.
4
x
5
Using a 5mm allen wrench,
tighten Quick Clamp.
6
Using a 5mm allen wrench,
tighten two socket head
cap screws in each cross tie
adjustment plate.
