IS125 Conveyors | Installation & Maintenance Instructions
7
u
Mounting Angle Braces
2
x
2
x
1
Insert drop in nuts into
stand leg t-slots. (One per
slot)
2
Align angle brace over drop
in nuts in stand.
3
Using diagonal holes, insert
socket head cap screws
through angle brace and into drop
in nuts on stand (do not fully
tighten).
4
Align angle brace to frame
holes.
2
x
2
x
5
Drive in torx screws with
a drill.
6
Check stand for plumb.
7
Tighten socket head cap
screws and repeat process
on other side of conveyor.
8
Check with bubble level to
ensure conveyor is level.
Injury is possible if the stands are not lagged to the floor, cross ties are not used, or angle braces are not present. Never place a conveyor in operation until all proper
mounts are installed and secured.
Warning:
Moving conveyors with casters can create dynamic forces that could tip the conveyor. Use caution when moving a conveyor with casters.
