Prusa Research i3 MK2.5, Руководство пользователя

Страница: 5 / 70

8 Advanced Calibration 37
8.1 PID tuning for Hotend (Optional) 37
8.2 PINDA probe calibration/ Temp. calibration (Experimental/Optional) 37
8.3 View XYZ calibration details (Optional) 38
8.4 Linear Advance (Experimental) 38
8.5 Extruder info 40
9 Printer drivers 41
10 Printing your own models 41
10.1 Where can you get the 3D models? 41
10.2 In what program can you create your own models? 41
10.3 PrusaControl 42
10.4 Slic3r Prusa Edition 44
10.5 Bundled 3D models 45
10.6 Print in color with ColorPrint 45
10.7 Printing of non-standard models 48
10.7.1 Printing with support material 48
10.7.2 Large object printing 49
11 Materials 50
11.1-11.11 ABS ​ , ​ PLA ​ , ​ PET ​ , ​ HIPS ​ , ​ PP ​ , ​ Nylon, ​ Flex ​ , ​ Composite materials ​ , ​ ASA ​ , ​ nGen ​ , ​ PC-ABS 50
11.12 Dialing in new materials 57
12 FAQ - Printer maintenance and print issues 58
12.1 Regular maintenance 58
12.1.1 Bearings 58
12.1.2 Fans 58
12.1.3 Extruder drive gear 59
12.1.4 Electronics 59
12.1.5 PEI rejuvenation 59
12.2 Print surface preparation 59
12.3 Filament sensor 59
12.3.1 Running out of filament 60
12.3.2 Filament jam 60
12.3.3 False sensor readings and debugging
​
-
​
Dust on the sensor
​
,
​
Extreme light conditions
​
,
​
Exotic filaments 60
12.4 Clogged / jammed extruder 61
12.5 Nozzle cleaning 62
12.6 Replacing / changing the nozzle 63
12.7 Printing problems 65
12.7.1 Layers break and split when printing from ABS material 65
12.7.2 Models contain either too much or not enough of the filament 65
12.8 Problems with finished models 65
12.8.1 Model breaks and/or is easily damaged 65
12.9 Updating printer firmware 65
13 FAQ - common issues when assembling the printer kit 66
13.1 Nozzle/print surface gap is greater in the middle than at the corners 66
13.2 Printer stops printing soon after start 67
13.3 Printer can’t read the SD card 67
13.4 Loose X- and/or Y-axis belts 68
13.5 Detached cables to the heatbed 69
5