Promise Technology VTRAK M610p, Руководство по эксплуатации продукта

Страница: 20 / 284

VTrak M610p Product Manual
8
Mounting VTrak in a Rack
The M610p subsytems installs to the rack using the supplied mounting rails. You
can also use your existing rails.
Figure 1. VTrak M610p mounted in a rack with the supplied rails
To install the VTrak enclosure into a rack with the supplied mounting rails:
1. Check the fit of the mounting rails in your rack system.
2. Adjust the length of the mounting rails as needed.
3. Attach the mounting rail assemblies to the inside of the rack posts, using the
attaching screws from your rack system.
Be sure the support is on the bottom facing inward.
4. Square the rail assemblies in the rack.
5. Tighten the adjustment screws and the attaching screws.
6. Place the VTrak subsystem onto the rails.
7. Secure the VTrak subsystem to the rack through each handle, using the
attaching screws from your rack system.
Cautions
• At least two persons are required to safely lift, place, and
attach the VTrak enclosure into a rack system.
• Do not lift or move the VTrak enclosure by the handles, power
supplies or the controller units. Hold the enclosure itself.
• Do not install the VTrak enclosure into a rack without rails to
support the enclosure.
Vertical Rack Post VTrak M610p
Mounting rails (included)
mount inside the rack post Handles mount
outside the rack post