OTHER FEATURES
The MCD uses a dashboard integrated liquid
crystal display. It provides automated intensity
control of the display, based on the dashboard
instrument panel lights for improved driver
convenience.
Should an alert message be sent out by the
ECM, the driver will be shown what is wrong via
an error code. Symbols may be displayed on the
screen when a condition occurs or as a reminder
that a feature is enabled. These symbols
include a bell when the reminder alarm is on,
“PTO” when fast idle is activated or “CC” when
cruise control is activated.
Note:
When a condition requiring attention
occurs, the screen relating to that condition will
automatically replace the current display.
The MCD works with interactive menus in a
series of cascading layers. The MCD allows
access only to GAUGE MODE, FUEL
ECONOMY and TIME/DIST menus when the
vehicle is moving. Access to the remaining
menus is granted when the vehicle is stopped.
The driver inputs commands and settings by
using the keys on the MCD keypad.
06399
Use the up (
↑
) and down(
↓
) arrows to highlight a
function or a setting. At any given level, small
arrows may appear in the upper and lower right
corner of the display. This means that more
information is available by scrolling up or down
with the arrow keys.
To change the setting of a feature, press enter
key (
↵
). The first value to set is highlighted. Set
the correct value with the arrow keys. Press the
enter key when the correct value is displayed.
The next value to set is highlighted. In some
cases, the enter key will reset compiled data. In
that situation, the MCD will prompt you to press
the enter key for 1 second to prevent accidental
resetting.
To return to the previous level, press Esc key
any time. In most cases, the MCD will return to
the previous level once a setting has been
chosen.
To return to the main menu from any submenu,
press Esc key a few times.
GAUGE MODE
Transmission oil temperature, engine oil
temperature and battery voltage can be
displayed in this mode.
To display:
1. Highlight GAUGE MODE;
2. Press enter key (
↵
);
3. Choose a gauge using the up (
↑
) or down
(
↓
) arrow keys.
To exit gauge mode, press Esc key.
Note:
When a condition requiring attention
occurs, the screen relating to that condition will
automatically replace the current display.
06398
FUEL ECONOMY MODE
Check average and instantaneous fuel
consumption, as well as distance until empty.
To display:
1. Highlight FUEL ECONOMY;
2. Press enter key;
3. Toggle between average/instantaneous fuel
consumption or leg fuel consumption using
the up and down arrows;
To exit FUEL ECONOMY mode, press Esc key
any time.
4. To reset average and instantaneous fuel
consumption, press enter key. The MCD will
prompt you to press enter key for one
second to reset;
4-3