CONTROLS AND INSTRUMENTS
Back-Up Camera Switch
Press down this switch to turn
ON
the Back-Up Camera’s
monitor when the transmission
of the motorcoach is not in the
reverse gear.
Door Entrance Switch
Use this rocker switch located
on the dashboard’s R.H. side
panel for locking or unlocking
the entrance door from the
inside.
Warning :
The mechanism automatically
completes door closing when the door is almost
shut. Be careful to keep fingers or hands away
from door edges when closing.
Brightness Control
Adjusts the brightness of the
dashboard instruments and switches.
HVAC Control Unit
The motorcoach is pressurized by the central
A/C - heating system. Air flow and controls
divide the motorcoach into two areas:
•
driver area with defroster;
•
cabin area.
Pressurization of the motorcoach helps prevent
dust and moisture from entering.
Fresh air is fed in each area and has a separate
return air and discharge air duct.
Warning :
Do not let temperature in the
driver's area rise above 72°F (22°C). Warm
temperatures may cause drowsiness and affect
alertness while driving. Keep temperature
between 68°F to 72°F (20°C to 22°C).
Note :
To operate the air conditioning
system when the motorcoach is stationary, run
engine at fast idle. When the A/C system is
running, keep windows and door closed.
To prevent battery run-down, the A/C and
heating systems will not operate if the charging
system is not working properly.
When the A/C system is running, park the
motorcoach at least 4 feet (1,5 m) from other
vehicles or buildings to allow sufficient air flow
through the condenser core.
O
O
DRIVER
PASSENGER
Separate driver and cabin heating, ventilation
and air conditioning controls are located on this
panel. To operate, the motorcoach’s engine
must be running.
The driver’s or the cabin’s units may be turned
ON
by pressing
or
or
buttons.
All parameters set before turn
OFF
will be kept
in memory for the next power
ON
.
The HVAC module performs a self diagnostic
every time it is turned
ON
. Codes are shown on
displays or flashed on control buttons. Refer to
"Maintenance Manual" for more information on
the diagnostic codes.
Heating Mode Indicator
lluminates when system is heating.
CAMERA
B/U
3-16