MOTORCOACH EXTERIOR
Manually Adjusted Mirror (Ramco)
FLAT
MIRROR
CONVEX
MIRROR
CONVEX
MIRROR
BALL CUP
HALF
CENTERLINE
OF ARM
SCREW
SETSCREWS
MIRROR
ARM
MOUNTING
BOLT
MOUNTING
BRACKET
BALL
STEM
MIRROR
HEAD
POSITION BALL CUP
HALVES SO THE JOINT
BETWEEN THEM LIES ON THE
CENTERLINE OF THE ARM.
ENSURE THAT THE SETSCREWS
ARE NOT ON THE JOINT BETWEEN
THE CUP HALVES
RAMCO REAR-VIEW MIRROR
18201
Adjustment
Loosen the bolt on the bracket of the mirror body.
Adjust the mirror to the desired angle, then
tighten bolt.
Head Mirror Adjustment
Loosen the fixing screws. Adjust the head of the
mirror, then tighten fixing screws.
Caution :
Do not over tighten the screws.
Tighten until snug.
RETRACTABLE BACK-UP
CAMERA
An optional back-up camera is available which
provides the driver with visual assistance when
backing-up. The back-up camera is mounted in
a retractable housing. For additional information,
refer to "Controls & Instruments" and ‘Care and
maintenance’ chapters.
Note :
A switch located in the rear electric
compartment is used to retract the back-up
camera for cleaning or maintenance.
ENGINE COMPARTMENT REAR
DOOR
The engine compartment rear door provides
access to the following:
•
Engine starting selector;
•
Engine coolant surge tank;
•
Air cleaner restriction indicator;
•
Engine oil dipstick;
•
Engine oil reserve tank;
•
Automatic transmission oil dipstick;
•
Engine coolant filler cap.
DOOR LATCH RELEASE LEVER
The engine compartment rear door latch release
lever is located in the upper rear section of the
engine compartment R.H. side door. Push up
release lever, then place hand on the upper right
of the rear door and pull rearward. The door will
open automatically.
Always engage the safety catch when the engine
compartment rear door is open. Release the
catch before closing the door.
The lighting in the engine compartment rear door
turns
ON
automatically when the door is opened.
If the door is open, a telltale light will illuminate on
the central dashboard.
1-7