CHAPTER 2 : MOTORCOACH INTERIOR
SEATS
Driver's Seat - "Delivery"
The driver's "delivery" seat is standard and legal
only for driving the vehicle on its initial delivery.
It is a conventional van seat equipped with
tracks for fore and aft adjustments.
Driver's And Co-pilot's Seats -
ISRI (optional)
Two distinct
ISRI
model driver's and co-pilot's
seats may be supplied with your vehicle: both
with a sophisticated air suspension system, one
being manually operated, while the other is
electrically operated. Both seats may be
equipped with lumbar supports, heated cushions
and adjustable armrests. Seats can be adjusted
to the desired driving position by following the
instructions listed below:
PNEUMATIC DRIVER’S SEAT
18026
Warning :
Never try to adjust seat while
driving vehicle as this could result in loss of
vehicle control.
1. Armrest
Rotate control knob to select desired arm-
resting angle. When not in use, raise armrest
parallel with backrest.
2. Backrest
Lift lever to select proper adjustment angle of
backrest.
3. Fore-and-aft *
Pull handle up and slide seat forwards or
backwards to adjust distance between seat
and dashboard.
4. Incline*
Pull handle up and adjust seat inclination.
* If your vehicle has electric ISRI seats,
controls 3 & 4 change. For description of
electric controls, see Electric ISRI Seats on
next page.
Warning :
Before proceeding with seat
cushion adjustments, lower seat belt retractor to
avoid pinching fingers between retractor and
control knobs.
5. Suspension
For maximum suspension performance, push
or pull knob until desired damping is reached.
6. Raise/Lower
Press on
+
or
-
to respectively raise or lower
driver's seat.
7. Lumbar Support
Push on upper section of rocker switches to
inflate lumbar support bellows inside the seat
backrest and push on lower section of rocker
switches to deflate bellows.
Note :
Rear and front rocker switches are
respectively for upper and lower lumbar support
bellows.
2-1