Powis Parker Fastback 8x, Руководство по обслуживанию, Страница: 59 / 83

FB8X Service Manual Rev. C, 9/28/10 Page 55
S E R V I C E A N D C A L I B R A T I O N P R O C E D U R E S
6
6 . 9 H e a t e r A s s e m b l i e s
6.9.2 Removing the Carriage Assembly
(Back Heater)
1. Remove the Right and Left Covers.
2. Remove the Front Cover.
3. Remove the Cooling Rack.
4. Remove the M3x10 SH CAP Screw
attaching the Carriage Clamp Switch us-
ing a 2.5mm Hex Key (fig 1).
5. Remove the Carriage Springs.
6. Remove the Left Carriage Guide by
unscrewing the two M3x10 PH PHIL
Screws (fig 2).
7. Remove the two M4x20 PH PHIL Screws
attaching the Drive Nut Plate, the Right
Carriage Guide, and the Carriage Back
Guide (fig 3).
8. Remove the Right Carriage Guide by
moving the Carriage Assembly towards
the front of the machine and sliding the
guide all the way forward and out of the
slot (fig 4).
9. Disconnect the Wire Harness from the
Book Detector PCA.
10. Disconnect the Back Heater wires from
the Controller Assembly.
11. Remove the Carriage Assembly.
Fig 1
Fig 2
Fig 3
Fig 4
TOOLS REQUIRED: #1 & #2 Phillips Screwdrivers, Needle Nosed Pliers, 2.5mm Hex Key