Powis Parker Fastback 8x, Руководство по обслуживанию, Страница: 47 / 83

FB8X Service Manual Rev. C, 9/28/10 Page 43
6.1.3 Front Cover
Removing the Front Cover
1. Remove the Skirt The Skirt is at-
tached by two M3x6 SEM PH PHIL
Screws (fig 1).
2. Use your hands and pry off the bot-
tom of the Front Cover as shown.
Rotate the Cover upwards until it
can be removed from the Tamping
Platform (fig 2).
Attaching the Front Cover
1. Insert the lip of the Front Cover into
the crevice on the Tamping Platform
(fig 3) and then snap the bottom of
the Front Cover into each of the lock-
ing places in the base (fig 4).
2. Reattach the Skirt.
S E R V I C E A N D C A L I B R A T I O N P R O C E D U R E S
6
Removing the Cooling Rack
1. Remove the Right and Left
Covers.
2. Remove the Cooling Rack. The
Cooling Rack is attached by
four M4x10 PH PHIL Screws
(fig 5 & 6).
Attaching the Cooling Rack
1. Insert the slot on the underside of
the Cooling Rack into the edge of
the Backside Plate (fig 7).
2. Use the four M4x10 Screws to
reattach the Cooling Rack, making
sure the edge of the Cooling Rack
is even with the top edge of the
side plates (fig 8).
6 . 2 C o o l i n g R a c k
Fig 4
Fig 2
Fig 1
Fig 3
Fig 5
Fig 6
Fig 7
Fig 8
TOOLS REQUIRED: #1 Phillips Screwdriver
TOOLS REQUIRED: #1 & #2 Phillips Screwdrivers