Powis Parker Fastback 8x, Руководство по обслуживанию, Страница: 41 / 83

FB8X Service Manual Rev. C, 9/28/10 Page 37
S E R V I C E M E N U
5
5 . 4 T E S T I N G A N D C A L I B R A T I O N
5.4.4 Entering A_HI/A_LO values
CAUTION: Entering the wrong values
can damage the unit and lead to bind
problems.
1. Enter the Service Menu and select the HEATERS
menu.
2. Select the A_HI/A_LO INPUT menu.
The A_HI/A_LO INPUT menu consists of
these six submenus:
SPINE HIGH
SPINE LOW
BENDER HIGH
BENDER LOW
BACK HIGH
BACK LOW
3. Select the appropriate menu for the heater you are
inputting the value. For example, if you are enter-
ing the A_HI value for the Spine Heater, select the
SPINE HIGH menu.
4. A_HI/LO: XXX.X will appear on the display. Press
the Bind button.
5. “EDIT? bind = yes” will appear on the display.
Press the Bind button to confirm that you want to
edit the value.
6. A_HI: XXX.X will appear on the display with the
last value blinking. Enter the A_HI or A_LO value
starting with the last value first. The A_HI and A_LO
values are located on the heater tags (fig 1).
Use the orange Menu and Open buttons to toggle
through numbers and press the green Bind button save
the number. When you press the Bind button you will
be forwarded to the next number.
When you enter the final value, the display will say
“SAVING...” and then you will be taken out of this sub-
menu and returned to the A_HI/A_LO INPUT menu.
7. After entering the A_HI or A_LO values for the
heater, it is recommended you go back into those
menus and verify the correct values have been
inputted.
The A HI and A LO values are located on the heater tags.
Disregard any negative (-) symbol in front of the A LOW and A
HIGH value if present.
Fig 1