Powis Parker Fastback 8x, Руководство по обслуживанию, Страница: 31 / 83

FB8X Service Manual Rev. C, 9/28/10 Page 27
S E R V I C E M E N U
5
5 . 3 S e r v i c e M e n u D e s c r i p t i o n s
CAL HEATERS
Selecting this menu option will allow you to calibrate all three Heaters. When calibrating the
Heaters it is very important that the Heaters are at room temperature. If the calibration is successful, the
display will read SUCCESS. If the calibration is unsuccessful, a failure message will appear on the display.
SHOW CALIBRATION
This menu displays the calibration values for the machine. Use the OPEN and MENU button to
toggle through the list of values.
BOOK: XX OK/NG
This menu option displays the book calibration value. There will be an OK if the value is in the
acceptable range or an NG message if the out of range.
STRIP: XX OK/NG
This menu option displays the strip calibration value. There will be an OK if the value is in the
acceptable range or an NG message if the out of range.
CARR: XX OK/NG
This menu option displays the carriage calibration value. There will be an OK if the value is in the
acceptable range or an NG message if the out of range.
TEMP: XX OK/NG
This menu option displays the room temperature reading taken during the heater calibration.
There will be an OK if the value is in the acceptable range or an NG message if the out of range.
SPINE: XX OK/NG
This menu option displays the Spine Heater calibration reading during heater calibration.
There will be an OK if the value is in the acceptable range or an NG message if the out of range.
BEND: XX OK/NG
This menu option displays the Bender Heater calibration reading during heater calibration.
There will be an OK if the value is in the acceptable range or an NG message if the out of range.
BACK: XX OK/NG
This menu option displays the Back Heater calibration reading during heater calibration.
There will be an OK if the value is in the acceptable range or an NG message if the out of range.