Powis Parker Fastback 8x, Руководство по обслуживанию, Страница: 36 / 83

Page 32 FB8X Service Manual Rev. C, 9/28/10
S E R V I C E M E N U
5
5 . 4 T E S T I N G A N D C A L I B R A T I O N
CHECKING THE SPINE HEATER TEMPERATURE
1. Enter HEATERS menu.
2. Select HEATER TEST.
3. Select TEST SPINE by pressing the green BIND button.
The fan will turn on and the heater will begin to heat up.
4. Place the straight Temperature Probe right below the
crescent shaped hole in the Spine Heater. Keep the probe
on the heater for at least 90 seconds, until the
temperature stabilizes.
To turn off the Spine Heater, press the orange OPEN button.
Turn off the machine if the temperature
exceeds 350°F (177°C). Then contact Powis Parker
Technical Service.
5.4.1 MEASURING HEATER TEMPERATURE
To measure the temperature of the heaters you will need a Thermocouple Meter (K-820-011), a straight
Temperature Probe (K-820-012), and a Right Angled Temperature Probe (K-820-3436).
When measuring the heater temperature, it is necessary to keep the Temperature Probe on the heater for at least
90 seconds.
Take the temperature in the middle of the heater, as shown in each of the pictures. Use the crescent shaped hole
in the Spine Heater and the Hot Symbol Label as reference points.
Spine Heater Temperature Range
300°F- 330°F
149°C-166°C