Powis Parker Fastback 8x, Руководство по обслуживанию, Страница: 19 / 83

FB8X Service Manual Rev. C, 9/28/10 Page 15
T R O U B L E S H O O T I N G G U I D E
4
Possible Cause Solution
The operator pressed the Bind button without inserting a
book into the binding recess. Place a book into the machine and then press the Bind
button.
The sheets are not fully justified against the right side of the
binding recess. Tap the edges of the sheets until the book is flush
against the right side of the binding recess prior to
pressing the BIND button.
The Book Sensor is damaged. Replace the Book Sensor.
Failed Controller. Replace the Controller
•
Error Message: “INSERT BOOK”
Possible Cause Solution
You are trying to bind too many sheets with the medium strip. Remove some sheets.
Possible Cause Solution
You are trying to bind too many sheets with a narrow strip. Remove some sheets or use a medium width strip.
There is no strip in the binding recess. Insert a medium strip.
Possible Cause Solution
You are trying to bind too few sheets with a medium strip. Add some sheets or use a narrow width strip.
There is no strip in the binding recess. Insert a narrow strip.
Possible Cause Solution
The strip is inserted into the machine backwards. Make sure the short end of the strip is vertical and the
long end of the strip is flat.
Make sure the strip is flat. An over folded or curled strip
can cause a “Reverse Strip” error.
Possible Cause Solution
The strip is too wide for the amount of sheets placed in the
binding recess. Add more sheets or use a narrower width strip.
The strip is not folded. Make sure to fully fold the strip into a 90 degree angle.
The strip is not lined up properly. Make sure the strip and the sheets are justified against
the back of the binding recess.
The machine is configured to bind the new Lx-Strip and
you tried to bind using the original type L-Strip. In settings, select the L-STRIP ON menu option in the
STRIP MODE Settings menu.
•
Error Message: “USE SMALLER SIZE”
•
Error Message: “BOOK TOO THICK”
•
Error Message: “USE MEDIUM SIZE”
•
Error Message: “USE NARROW SIZE”
•
Error Message: “REVERSE STRIP”
4 . 2 E r r o r M e s s a g e s