Page 20 FB8X Service Manual Rev. C, 9/28/10
4 . 5 P o o r B i n d Q u a l i t y
T R O U B L E S H O O T I N G G U I D E
4
Possible Cause
Solution
The Strip is not folded in a 90 degree angle.
Fold the Lx-Strip into a 90 degree angle. The
better you fold the strip the more square the
spine will be.
The book was not placed in the Cooling Rack after being
bound.
After binding, make sure the book is placed in the
Cooling Rack to properly cool down.
• SPINE IS NOT SQUARE
Possible Cause
Solution
The edges of the pages are not even.
Tap on the top and left sides of the pages until
the edges are even.
The Strip is not flush against the right side of the binding
recess.
Make sure the strip is flush against the right side of the
binding recess.
• PAGES PROTRUDE PAST THE STRIP
Possible Cause
Solution
The machine is not set to the correct binding style.
Verify the machine is set to the correct binding style.
• BIND QUALITY IS UNSATISFACTORY
Part of the pages separate from the strip
There are gaps in the pages where the strip can be seen
There is Thermo-plastic adhesive leakage.
Possible Cause
Solution
Some paper stocks and some heavy cover material can be
difficult to bind.
The bind may be improved by increasing the Spine Bind
time in the Setting Menu.
• PAGES DO NOT ADHERE TO THE STRIP VERY WELL
Содержание Fastback 8x
