manualshive.com logo in svg

Powis Parker Fastback 8x, Руководство по обслуживанию, Страница: 21 / 83

Поделиться
Скачать
Powis Parker Fastback 8x Скачать руководство пользователя страница 21

 FB8X Service Manual Rev. C, 9/28/10                                                                                                                  Page 17   

T R O U B L E S H O O T I N G   G U I D E

4

4 . 3     M a c h i n e   E r r o r s 

Possible Cause

Solution

Carriage Motor/Carriage Assembly is jammed or obstructed.   Remove any obstructions that may cause the Carriage 

Assembly to jam.  

Carriage Motor is burnt out.  

Replace the Carriage Motor if it is burnt out.  

Carriage Home Switch or Carriage Clamp Switch problem.

Check the functionality of the Carriage Home Switch 
and the Carriage Clamp Switch.  See Section 5.4.2 
“Checking the Sensors”.  Replace the Switches if 
necessary.

Failed Controller Assembly.

Replace the Controller Assembly.  

• 

Error Message:  MACHINE ERROR 50

This error occurs when a user tries to bind a book and the carriage does not move.  

Possible Cause

Solution

Carriage Clamp Switch or Carriage Home Switch failure.

Check the function of both switches in the CHECK 
SENSORS menu.   Replace any damaged switches.

Obstructions in the binding recess.

Check for obstructions in the binding recess.  If 
necessary remove the Carriage Assembly to check for 
any obstructions.

• 

Error Message:  MACHINE ERROR 51

This error indicates a carriage jam.

Possible Cause

Solution

Electrical supply is not 50 Hz or 60 Hz.

Switch to a regulated power supply.  

Failed Controller Assembly.

Replace the Controller Assembly.

• 

Error Message:  MACHINE ERROR 60 or 61

This error indicates a problem with the line voltage.

Possible Cause

Solution

An obstruction prevents the Carriage Assembly from 
returning to its home position.

Remove any obstructions.

Carriage Home Switch failure.

Check the functionality of the Carriage Home Switch.  
See Section 5.4.2 “Checking the Sensors”.  Replace the 
Switch if necessary.

Failed Controller Assembly.

Replace the Controller Assembly.

• 

Error Message:  MACHINE ERROR 52

This error indicates a problem with the Carriage Home Switch.

Содержание Fastback 8x




















































































Отзывы:

Нет отзывов