Powis Parker Fastback 8x, Руководство по обслуживанию, Страница: 35 / 83

FB8X Service Manual Rev. C, 9/28/10 Page 31
S E R V I C E M E N U
5
5.3.6 MOTORS
CARRIAGE
In this menu, you can test the function of the Carriage Assembly. Press the MENU button to move the Carriage
Assembly forward, and press the BIND button to move the Carriage Assembly backward and into the home
position. When the Carriage Assembly is all the way back in its home position, a home offset value (+/- 25) will
appear on the display. When the Carriage Assembly is moved all the way forward (with the binding cavity empty),
three values will appear on the display. The first value must be 2000 +/-64.
BENDER1
In this menu, you can test the function of the Bender mechanism. Press the BIND button to move the Bender
Heater up, and the MENU button to move the Bender Heater down. After moving the Bender Heater up, the
display will read UP and a value will appear. This value should be 50 +/- 5. After moving the Bender Heater down,
the display will read DOWN and a value will appear. This value should be 0 +/- 5.
BENDER2
In this menu, you can test the function of the Bender mechanism. Pressing either the BIND or MENU buttons will
move the Bender Heater in either the up position, the down position, or the middle position.
TOGGLE HEATERS
In this menu, you can turn on all three heaters while performing one of the other motor tests. After turning the
heaters on, toggle back through the menu by pressing the MENU or OPEN button and select the Motor test you
want to perform. After testing the motor, go back to the TOGGLE HEATERS menu and turn the heaters off.
The heaters do not turn off on their own. Leaving the heaters on for extended periods of time is not
recommended for safety reasons.
5.3.7 FACTORY USE
This menu is for use at the factory when the machine is manufactured.
5 . 3 S e r v i c e M e n u D e s c r i p t i o n s