Porsche Cayenne 2020, Руководство пользователя

Страница: 47 / 366

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Adaptive Cruise Control (ACC)
45
WARNING
Following too close
Driving too close to the vehicle in front may result in
a collision.
e Always maintain the specified distance that ap-
plies in each country.
Automatic braking until the ve-
hicle comes to a standstill
If the vehicle in front stops, Adaptive Cruise Control,
if active, slows the driver's vehicle and brings it to a
stop within the control parameters.
The light indicator on the instrument cluster
lights up.
The vehicle is actively held in a stationary position.
For information on the HOLD function: Please see
chapter "HOLD Function: Standstill Management" on
page 132.
Information
Depending on the traffic situation, e.g., in slow-
moving traffic, deceleration begins with a slow
creeping phase that ends with the vehicle at a
standstill.
Information
When distance control is active or while the vehicle
is held, the brake pedal may feel different and you
may hear hydraulic noises. This behavior is typical of
the system. There is no fault.
Moving off again
Depending on the operating status of Adaptive
Cruise Control, it is possible to drive off again after
the vehicle has stopped and automatic speed and
distance control can start again.
Adaptive Cruise Control (ACC) active
e
Push up the control lever on the steering wheel
(setting 4 , RESUME ).
– or –
Touch the accelerator pedal briefly.
The vehicle continues driving automatically.
Automatic moving off again in stop-and-go traf-
fic within a few seconds.
Information
Depending on the situation, Adaptive Cruise Control
supports automatic moving off again in stop-and-go
traffic. This enables comfortable control in slow-
moving traffic.
The message ACC ready on the instrument cluster
informs the driver that the vehicle is ready to move
off.
WARNING
Risk of collision
The vehicle may move off again in stop-and-go
traffic, even if there is an obstacle between your ve-
hicle and the vehicle in front.
e
Brake immediately.
Information
It is not possible to move off as long as the vehicle
ahead remains stationary.
Adaptive Cruise Control (ACC) ready
Automatic speed and distance control only can be
resumed again when the vehicle is stationary or
moving and if no stationary objects are detected in
front.
e Press the control lever on the steering wheel
upward (position 4 , RESUME ).
– or –
Set the desired speed.
Interrupting and resuming speed
and distance control
Interrupting speed and distance control –
CANCEL
e Press the brake pedal.
– or –
Press the control lever on the steering wheel
down (setting 3 , CANCEL ).
Adaptive Cruise Control is inactive.
The desired speed and distance settings are
retained.
The status display B changes from red to gray.
Information
When the vehicle is stationary, the speed and dis-
tance control can only be canceled via the control
lever. Activation of ACC is thus also possible when
stationary
Resuming cruise control and distance control
– RESUME
e
Briefly press the control lever on the steering
wheel upward (position 4 , RESUME ).
The vehicle accelerates to the set desired speed
provided there is no vehicle detected ahead
traveling slower than the selected speed and the
distance from this vehicle is less than the set
desired distance.