Porsche Cayenne 2020, Руководство пользователя

Страница: 143 / 366

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Instrument Cluster
141
Tire pressure warning light
During the teach-in process for newly
fitted wheels or tire pressure sensors, in
the event of pressure loss in a tire, a fault
or a temporary malfunction of the Tire
Pressure Monitoring (TPM) system, the
warning light may flash or light up.
E-sound warning light
All-wheel warning light
Porsche Active Safe (PAS) warning light
Lane Change Assist light indicator
Electric parking brake warning light
(USA)
Electric parking brake warning light
(Canada)
Porsche Active Suspension Management
(PASM) warning light
Anti-lock brake system (ABS) warning
light (USA)
Anti-lock brake system (ABS) warning
light (Canada)
Power steering warning light
Central warning light
Left turn signal
Right turn signal
Airbag warning light
Seat belt warning light
Brake warning light (USA)
Brake warning light (Canada)
Brake pad warning light (USA)
Brake pad warning light (Canada)
Porsche Stability Management (PSM)
warning light
Porsche Stability Management (PSM)
OFF warning light
Night Assist light indicator
HOLD function light indicator
Emission control warning light (Check
Engine)
In the event of malfunctions (e.g. engine
misfiring) that could increase pollutant
emissions or cause consequential dam-
age the warning light may flash or light
up.
If the emission control (Check Engine) warning
light flashes or lights up
e
Reduce engine speed and load immediately.
e
If necessary, stop when it is safe to do so. Make
sure that combustible materials, such as dry
grass or leaves, cannot come into contact with
the hot exhaust system.
e Note measures for emission control faults.
Operating the instrument cluster
WARNING
Configuring settings and
operating while driving
Configuring settings and operating the multifunction
steering wheel, infotainment system, etc. while
driving can distract you from the traffic. You may
lose control of the vehicle.
e Only operate these components while driving if
the traffic situation allows.
e If in doubt, stop in a safe place and only carry out
extensive operations and settings while the ve-
hicle is at a standstill.
The instrument cluster is only ready for operation
when the ignition is on. For safety reasons, some
functions are only available when the vehicle is
stationary.
Fig. 76: Operating instrument cluster with the multifunction
steering wheel
A - Scrolling to and selecting menus and functions
in the Speed & Assist 1 display
e Scrolling: Turn rotary push button A up or down.
e
Select/Enter: Press rotary push button A .
B - Muting the audio source
e Press the Mute button B .
C - Skipping back one or several selection levels in
the Speed & Assist 1 display
e Press the Back button C .
D - Increasing or decreasing the volume
e Press the Volume buttons D .