Porsche Cayenne 2020, Руководство пользователя

Страница: 329 / 366

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Windows
327
Windows
Opening and closing windows
WARNING
Opening and closing
windows
When opening or closing the windows, particularly in
automatic mode, body parts can become trapped
between the moving window and stationary vehicle
parts.
e When opening and closing the windows, make
sure that no parts of the body can become trap-
ped between the moving windows and stationary
vehicle parts.
e
Always switch off the ignition when leaving the
vehicle. People who are unfamiliar with the ve-
hicle could be injured when operating the power
windows.
e In case of danger: release the power window
button immediately.
e Do not leave children unattended in the vehicle.
WARNING
Closing a window
manually
If one-touch mode was deactivated after a window
was blocked, the window will close with its full force
when closed manually.
e Make sure that nobody is trapped or crushed
during closing of the windows.
Information
If a window is blocked by an obstruction when clos-
ing, the window stops and opens again a few
centimeters.
If the window is blocked a second time within
around 10 seconds, one-touch mode for this win-
dow is locked. The window can be closed manually.
One-touch mode is enabled again once the window
has been completely shut once in manual mode.
Opening and closing windows
b b
Ignition is switched on.
– or –
b b The ignition has been switched off, but for no
longer than 10 minutes.
b b The driver's or passenger's door has not yet been
opened.
Fig. 246: Buttons for driver's door power window
A Power window button, front, driver side
B Power window button, front, passenger side
C Power window button, rear, driver side
D Power window button, rear, passenger side
The switches feature a two-stage function . When
the buttons are actuated, both stages can be clearly
felt due to a resistance when pushed or pulled.
Stage one – manual operation
e
Press or pull the relevant rocker switch to the
first stage until the required position is reached.
The process stops when the switch is released.
Stage two – automatic operation
e
Briefly push or pull the relevant rocker switch
fully to the second stage.
The window opens or closes automatically to the
final position.
e Actuating the button again stops the window in
the required position.
Storing final position of windows
The final positions of the windows are lost after the
battery is disconnected and reconnected. Windows
automatic mode is not operative.
Perform the following steps for all windows:
1. Close the window completely once by pulling the
rocker switch to the second setting.
2. When the window is completely closed, briefly
pull the rocker switch to the second setting
again.
3. Completely open the window once by pressing
the switch.